Analyze laptop
damage requires foresight and patience. Do not rush to decide before doing
check the overall condition of your laptop. Here are some laptop problems that
often occur:
Dead or Power Failure
For the case of death that you should check first is your laptop batery. The possibility of your laptop batery run total. Try to do the charging and wait about 1/2 hour. Another cause is the laptop adapter is not functioning. You can check the indicator light illuminates when carger in laptop adapter laptop in love. If the indicator light does not light, there is the possibility of a faulty adapter or power connector board boardyang broken or damaged laptop. Another possibility laptop totally dead board, causing the total dead laptop altogether.
Power lights flash but the LCD screen does not display the image.
Please check to attach an external monitor to the VGA port on your laptop. Then turn on your laptop, if the laptop is still dead, the possibility of damage is VGA, the CPU, mainboard, the BIOS IC, or dirty or faulty RAM. Try to do check one by one.
And if an external monitor with the image of life and appear normal, the possibility of damage in the LCD inverter, LCD flexible cable, or LCD monitor. If the damage is on the LCD screen, then you have to replace the LCD screen because the LCD screen can not be repaired.
Laptop Cooling Problems
Common problems often faced by users of laptop heat is a problem, however, heat is the main enemy of the laptop, the laptop nearly 75% of the damage caused by excessive heat. Especially in the laptop casing hardly any empty spaces are all filled with components. The problem that often arises this section is clogged sewer heat on the heatsink as it is covered by dust. This causes the heat that would otherwise be issued re-entry into the laptop. As a result, the temperature inside the laptop up from the seharusanya allowed. This can cause over heating in the VGA chip, Processor, and other components of the laptop mainboard.
Ports and Connectors Power Problems
This problem is also common. This is caused by the breakdown of the existing solder on the connector or port. Solderan breakdown caused by heat and the age of the laptop itself. The solution is to re-solder the parts cracked solder.
May be useful!
Dead or Power Failure
For the case of death that you should check first is your laptop batery. The possibility of your laptop batery run total. Try to do the charging and wait about 1/2 hour. Another cause is the laptop adapter is not functioning. You can check the indicator light illuminates when carger in laptop adapter laptop in love. If the indicator light does not light, there is the possibility of a faulty adapter or power connector board boardyang broken or damaged laptop. Another possibility laptop totally dead board, causing the total dead laptop altogether.
Power lights flash but the LCD screen does not display the image.
Please check to attach an external monitor to the VGA port on your laptop. Then turn on your laptop, if the laptop is still dead, the possibility of damage is VGA, the CPU, mainboard, the BIOS IC, or dirty or faulty RAM. Try to do check one by one.
And if an external monitor with the image of life and appear normal, the possibility of damage in the LCD inverter, LCD flexible cable, or LCD monitor. If the damage is on the LCD screen, then you have to replace the LCD screen because the LCD screen can not be repaired.
Laptop Cooling Problems
Common problems often faced by users of laptop heat is a problem, however, heat is the main enemy of the laptop, the laptop nearly 75% of the damage caused by excessive heat. Especially in the laptop casing hardly any empty spaces are all filled with components. The problem that often arises this section is clogged sewer heat on the heatsink as it is covered by dust. This causes the heat that would otherwise be issued re-entry into the laptop. As a result, the temperature inside the laptop up from the seharusanya allowed. This can cause over heating in the VGA chip, Processor, and other components of the laptop mainboard.
Ports and Connectors Power Problems
This problem is also common. This is caused by the breakdown of the existing solder on the connector or port. Solderan breakdown caused by heat and the age of the laptop itself. The solution is to re-solder the parts cracked solder.
May be useful!
Tidak ada komentar:
Posting Komentar