Tips Merawat kamera digital

-->
Handycam Tips:

Tapes should not be left in camcorders when they are not in use. The tape may develop creases because of the way it is wrapped around the drum that reads the tape. These creases may cause recording and playback problems. The tape may also stick to the drum.
Do not put a really cold video tape into your camcorder.  Moisture from the warmer air tends to condense on the tape (just like it fogs your glasses when you come inside in winter), and that moisture can cause the tape to stick to the spinning drum.  The tape will get wrapped around the drum, destroying the tape and possibly damaging the video heads.
Batteries should not be left on camcorders that are not in use.  Some cameras draw a small, but constant, current even when turned off.
Purchase "memory free" camcorder batteries when replacing old batteries. This style battery allows you to use the battery for short periods of time, and recharge it without developing a situation in which the battery will only charge for short term use.
Do not leave camcorder tapes in a hot car.
Do not put labels on camcorder tapes where they may interfere with the opening of the tape door. This may cause the tape to jam in the camera.
We recommend that a technician clean the tape heads when they get dirty. This will help preserve the life of the heads.

Tips Merawat camera

CAMERA TAKING CARE TIPS

Here are some of our tips for the care of your camera:


Placing the camera on indoors (in a bag) can help reduce the intensity and quantity of the entry of dust, dirt and hairs that can get in or attached to the camera unit. Need to be extra careful when photographs in dusty environments and perpasir (beach).
Use the proper tool care and right cameras. Avoid using regular tissue, shirt dress, alcohol and other ingredients that are not devoted to the care of the camera. (please check our luggage item on the 'tools to take care of the camera')
Clean the camera and lens on a regular basis, especially after being used in an open space or after hunting. Keep your camera in the bag and tuck a bag of silica gel in the room to help maintain the bag of mushrooms.
Use the right and appropriate filters for cameras, multiple cameras are very sensitive to ultraviolet rays from the sun.
If there are quite a lot of camera accessories, then it should be placed in one bag simultaneously to facilitate the supervision of your favorite camera.
Do not carry your SLR camera with an attached flash to travel that far because the 'shoe base' flash or 'flash rail' will be prone to breakage.
Turn off the camera manually is generally better than the camera off automatically, because the extended battery life.
Remove the battery from the camera when not in use for a long time.
Clean your hands from dirt before you start photographing.
If the camera is exposed to water, immediately clean and dry it thoroughly. Can use a hairdryer to heat up enough to dry the camera out of the water.

salah satu jenis printer

Dot Matrix Printer

This type of printer Dot Metrics is a method of printing using a printer ribbon. Prints are produced to look like the points each mengubungkan one another, so that the print is less refined and less good. historically this type of printer Dot Matrix 9 Pin initially using the mean in one letter will be printed with a combination of 9 points, then growing to 24 pin, and of course, so the print will be much smoother. type dot metrix printer manufacturers are quite famous is Epson, the Epson LX products - 300, espson LX 800 and others.

            Dot Matrix Printer How It Works

Dot matrix printer is the first known in 1964, in 1970, most of the dot matrix printer industry is owned by Digital and Centronics, and Centronics prefer the low-end compared to Digital. LA30, LA36, and Centronics dot matrix printer 101 is in the early development of the dot matrix printer. 1970-1990 in dot matrix printers are the most reliable printers in terms of yield and price. In 1990 emerging dot matrix printer that supports connection to a computer using a USB port.

Dot-Matrix printers are printers that print is still very low resolution. In addition, when is printing, the printer of this type tend to be loud and sound quality is not good for printing images because the image is printed will look like dots interconnected.

Head of printer types, including 7 or 9 or 24 needles are arranged vertically and form a column. At work, there is a needle that will shape the character images through friction and needle on carbon paper. The printer is also a character type printer. Its speed varies, but for the Epson LX-80, is 80 caharacter per second.

At the head-printer, moving from left to right, touching the paper, the letters that have been plotted in an arrangement of needles will soon appear. Pattern letter is then received by a ribbon of carbon paper behind there, and there was a printing letter by letter.

Each character is formed will lead to a unique pattern that consists of various points within the dimensions of a matrix. Type of dot-matrix printers vary greatly, there is a type color and some are non-color. Generally, the printer type dot-matrix also has only one color, which is black. For color printers, used tape (carbon / Ribon) have 4 special colors, such as black, blue, red and yellow.

These printers are still widely used because it is the famous 'naughty' (durable). Another plus, dot-matrix printer ribbon is much cheaper than the toner (ink) for inkjet and laserjet printer types.

1. Turn off the printer, remove the lid and tape.

2. Remove dust or other debris on the printer.

3. Check and clean the streets and out of the paper and the platen.

4. Clean and replace the 'head' print.

5. Replace the tape if it is depleted.

6. Test printing to get the print quality is satisfactory.

7. Clean and return the printer cover.

8. Do check and make sure the paper is installed correctly and conditions go smoothly.

Fungsi Printer

function printer

Printer is one of the hardware (hardware) connected to the computer and has the function to print text, images and other displays from computer to paper or similar media. The term is known in the resolution of the printer is called dpi (dots per inch). That is a large number of points in the area of ​​1 inch. The higher the resolution the better the prints produced. Conversely, if the resolution is low then the printout will be bad / not good.

merawat camera digital

-->

Caring for Digital Camera

1.Hindarkan direct exposure to matahari.Jagalah digital camera you do not get sunburnt or exposed to direct sunlight and excessive. For tinggidapat heat damage camera parts made of plastic and rubber as well as other electronic components.

2.Jagalah your digital camera to avoid excessive shock. Do not forget to put it in taskhusus camera, in order to avoid excessive shocks to the external environment and the clash between equipment.

3.Bersihkan cameras and camera lensa.Sebaiknya cleaned once a week or on a regular basis and periodically. For the physical part of the camera using a dry, rough bersihdan not. While the inside and small elements, use a blower or blowers that are sold in stores camera.

4.Hindari scratches on lensa.Untuk avoid scratches, lens should have a permanent filter installed threaded front section. A common filter is a type of filter to be protective UV (ultraviolet) or skylight filter. Meanwhile, to avoid scratches on the back of the lens try to always put bodycup when the lens cover is removed from the camera body.

5.Hindari laut.Air sea water is very bad and causes corrosion potential towards the camera or other electronic device. Unless specifically designed for sea water. If at any time, your camera accidentally plunged into the sea water then soak your camera directly into fresh water, then rinse several times to remove the traces of sea water. Then taken immediately to a camera repair specialist to clean.

6.Jagan too often to clean the lens or clean the inside when moldy. Because glass is so sensitive lens. For more frequent cleaning can also result in poor image quality.

7.jangan keep them in the closet. Because it can invite fungus that attaches to the inside of the camera lens.

8.Waspadai lime barus.Sebab camphor is the most potent destroyer of the camera, which can wipe wiping the camera and the other camera-based rubber. In an electronic camera mothballs can damage path on the PCB (printed circuit board) which is where the camera is mounted chips and some elements of the chip itself. Even camphor vapor can also tarnish and make spots on the lens.

                                                                                                                    

tentang Hard disk

Hard Disk

Hard disk is an important component in a computer, because the operating system and all the programs and their data stored in the hard disk. Hard disks are perishable goods. For the treatment done from the hardware and software. ? For treatment of the hard disk of the hardware side, should be added a fan to reduce the heat on your hard disk. Fan is highly recommended for a hard disk with a speed of 7200 rpm upwards. In addition it should be noted the data cable settings for air circulation can run smoothly. ? For care of the software side, with enough tools that are available when installing the operating system. Tool includes scandisk and disk defragmenter. In addition there is also a tool tool is used to perform low-level formatting. Low level format is used to reconfigure the settings on the hard disk head covering, cylender, and sector. Low level format is the format of the physical aspect. For each model the hard disk has a separate program for low-level format. To use traditional brands Seagete SGATFMT4, use the zerrofill or zdisk Quantum, Maxtor with mud and for western digital wd_diag. ? Scandisk is a tool that is used to examine the structure of the file system, the file location table (file allocation table), and to determine whether there is bad sectors. Scandisk will run automatically every start if the computer does not shut down properly or there is a power failure.? Disk Defragmenter is a tool that is used to regulate the structure or layout of the file so that it will reduce the fragmentation of the hard disk space. Disk Defragmenter should be done regularly it will improve system performance and hard disk space. Here's an example of the process of disk defragmentation, you can see the difference before and after the disk defragmenter.? Figure 13 above shows the results of the report prior to defragment your hard disk. With some file fragmentation. Hard Disk?? Hard disk is an important component in a computer, because the operating system and all the programs and their data stored in the hard disk. Hard disks are perishable goods. For the treatment done from the hardware and software. ? For treatment of the hard disk of the hardware side, should be added a fan to reduce the heat on your hard disk. Fan is highly recommended for a hard disk with a speed of 7200 rpm upwards. In addition it should be noted the data cable settings for air circulation can run smoothly. ? For care of the software side, with enough tools that are available when installing the operating system. Tool includes scandisk and disk defragmenter. In addition there is also a tool tool is used to perform low-level formatting. Low level format is used to reconfigure the settings on the hard disk head covering, cylender, and sector. Low level format is the format of the physical aspect. For each model the hard disk has a separate program for low-level format. To use traditional brands Seagete SGATFMT4, use the zerrofill or zdisk Quantum, Maxtor with mud and for western digital wd_diag. ? Scandisk is a tool that is used to examine the structure of the file system, the file location table (file allocation table), and to determine whether there is bad sectors. Scandisk will run automatically every start if the computer does not shut down properly or there is a power failure.? Disk Defragmenter is a tool that is used to regulate the structure or layout of the file so that it will reduce the fragmentation of the hard disk space. Disk Defragmenter should be done regularly it will improve system performance and hard disk space. Here's an example of the process of disk defragmentation, you can see the difference before and after the disk defragmenter.? Figure 13 above shows the results of the report prior to defragment your hard disk. With some file fragmentation.